Karuvi Enterprises logoKaruvi Enterprises, TrichyCall 96292 78144

How to Choose a Vernier Caliper

Vernier, dial and digital calipers explained, with tips on range, resolution and reading.

Know the three types

A vernier caliper is read from two scales and needs no battery. A dial caliper shows the reading on a dial, which is quicker to read. A digital caliper shows the number on a screen and can switch between millimetres and inches.

Choose the range

A 150 mm caliper covers most workshop parts. Choose 200 mm or 300 mm only if you regularly measure larger parts, because longer calipers are heavier and bend more easily.

Check the resolution

Common vernier calipers read to 0.02 mm. Digital calipers usually show 0.01 mm. A finer display does not make the tool more accurate, so also check the build quality and the stated accuracy.

Look at the build

Hardened stainless steel jaws and scales resist wear. The slide should move smoothly without side play, and the jaws should close with no light visible between them.

Use it correctly

Close the jaws and check the zero before each use. Measure gently without forcing the jaws, and keep the faces clean. Use the outside jaws for outer sizes, the small inside jaws for bores and the depth rod for depths.

See measuring and layout in our catalogue   Ask us on WhatsApp

This is general guidance. Always follow the instructions and safety rating that come with your tool.

How to Choose an Angle GrinderHow to Choose a Drill BitHow to Choose a SpannerHow to Choose a Measuring TapeHow to Choose a HammerHow to Choose a Drilling Machine